TM 10-3930-675-24-1
ENGINE FUEL INJECTOR CIRCUITS TROUBLESHOOTING - CONTINUED
0008 00
Table 4. Error Code 1314 - Injector Circuit Failure Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 1314 - Injector Circuit Failure -
b. Measure resistance from a. If resistance is not as specified,
Continued.
actuator harness connector
repair or replace connectors
(WP 0113 00).
pin 2 to all other pins in
sensor harness connector. b. If internal actuator harness
requires replacement, notify
Resistance should be greater
SRA.
than 100k Ohms.
c. Measure resistance from a. If resistance is not as specified,
actuator harness connector
repair or replace connectors
(WP 0113 00).
pin 1 to all other pins in
actuator harness connector. b. If internal actuator harness
requires replacement, notify
Resistance should be greater
SRA.
than 100k Ohms.
d. Measure resistance from a. If resistance is not as specified,
actuator harness connector
repair or replace connectors
(WP 0113 00).
pin 1 to all other pins in
sensor harness connector. b. If internal actuator harness
requires replacement, notify
Resistance should be greater
SRA.
than 100k Ohms.
>100K OHMS
0008 00-13
