TM 10-3930-675-24-1
ENGINE FUEL INJECTOR CIRCUITS TROUBLESHOOTING - CONTINUED
0008 00
Table 9. Error Code 1324 - Injector Circuit Failure Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 1324 - Injector Circuit Failure -
a. Measure resistance from pin If resistance is not as specified,
Continued.
1 (or A) on solenoid notify SRA to replace internal
connector to engine block actuator harness.
ground. Resistance should
be greater than 100k Ohms.
b. Measure resistance from pin If resistance is not as specified,
2 (or B) on solenoid notify SRA to replace internal
connector to engine block actuator harness.
ground. Resistance should
be greater than 100k Ohms.
>100K OHMS
11.Place ignition switch in OFF
position and, with rocker arm
cover removed, disconnect no.
3 injector solenoid from
internal actuator harness.
12.Measure resistance from post a. If resistance is as specified,
replace engine ECU (WP 0079
to post on solenoid. Resistance
00).
should be 0.5 to 1.5 Ohms.
b. If resistance is not as specified,
replace injector (WP 0215 00).
0008 00-45
