TM 10-3930-675-24-1
ENGINE FUEL INJECTOR CIRCUITS TROUBLESHOOTING - CONTINUED
0008 00
Table 9. Error Code 1324 - Injector Circuit Failure Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 1324 - Injector Circuit Failure -
c. Measure resistance from a. If resistance is not as specified,
Continued.
actuator harness connector
repair or replace connectors
(WP 0113 00).
pin 16 to all pins in actuator
connector. b. If engine harness requires
harness
replacement, notify SRA.
Resistance should be greater
than 100k Ohms.
d. Measure resistance from a. If resistance is not as specified,
actuator harness connector
repair or replace connectors
(WP 0113 00).
pin 16 to all pins in sensor
connector. b. If engine harness requires
harness
replacement, notify SRA.
Resistance should be greater
than 100k Ohms.
>100K OHMS
5. Place ignition switch in OFF
position
and
disconnect
actuator
harness
15-pin
connector at front of engine
below rocker arm cover.
Disconnect actuator harness
connector from engine ECU.
0008 00-40
