TM 10-3930-675-24-1
ENGINE OIL PRESSURE SENSOR TROUBLESHOOTING - CONTINUED
0020 00
Table 1. Error Code 1135 - Oil Pressure Sensor Circuit Failure Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 1135 - Oil Pressure Sensor Circuit 2. Install breakout cable between
Failure - Continued.
sensor and engine harness
connector. Place ignition
switch in ON position.
3. Measure supply voltage from If voltage is not as specified,
pin A (or RED) to pin B (or proceed to step 4.
BLACK) of breakout cable.
Voltage should be 4.75 to
5.25V.
4.75-5.25V
4. Disconnect sensor harness
connector from engine ECU.
Place ignition switch in ON
position.
0020 00-2
