TM 10-3930-675-24-1
TOPHANDLER SIDESHIFT TROUBLESHOOTING - CONTINUED
0045 00
Table 2. Error Code 226 - Tophandler Sideshift Left,
Short Circuit Failure Troubleshooting Procedures.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 226 - Tophandler Sideshift Left, Short 1. Check wires and connectors at a. Repair or replace connectors
(WP 0113 00).
Circuit Failure.
tophandler control valve and
tophandler junction box for b. Replace damaged wiring
harness (WP 0221 00).
damage.
CAUTION
Uncontrolled function may occur with this error code.
2. Disconnect connector 6020 Replace open or shorted solenoid
from the tophandler left (WP 0171 00).
DIAG ATTACHMENT 7(16)
SIDE SH.OUTPUT/INPUT
sideshift solenoid. Check
LEFT
0.00mV
0mA
resistance of the solenoid
RIGHT
0.00mV
0mA
between both pins and between
each pin and ground (WP 0048
00-27). Resistance of the
solenoid should be 18 to 26
Ohms.
3. Disconnect connector X189 Replace shorted/grounded X189
from tophandler junction box to solenoids wiring harness (WP
and disconnect solenoid 6020. 0221 00).
Check for short to ground at
loose part of X189 at pin B
(wire 189B) (WP 0048 00-26).
4. Disconnect
ECU
(791) a. Repair or replace shorted
wires or connectors (WP 0113
connector 2. Inspect ECU and
00).
connector pins for damage.
Check wire A189B (pin 3) for b. Replace ECU (791) (WP 0077
00).
short to ground (WP 0048 00-
27).
NOTE
Multiple error codes associated with a common connec-
tor on ECU (791) may be the result of a short to ground
in the harness for the common solenoid voltage. (See
0045 00-3
