TM 10-3930-675-24-1
TOPHANDLER SIDESHIFT TROUBLESHOOTING - CONTINUED
0045 00
Table 4. Error Code 229 - Tophandler Sideshift Right, Short Circuit Failure Troubleshooting Procedures.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 229 - Tophandler Sideshift Right, 1. Check wires and connectors at a. Repair or replace connectors
Short Circuit Failure.
tophandler control valve and
(WP 0113 00).
tophandler junction box for b. Replace damaged wiring
harness (WP 0221 00).
damage.
CAUTION
Uncontrolled function may occur with this error code.
2. Disconnect connector 6021 Replace open or shorted solenoid
DIAG ATTACHMENT 7(16)
SIDE SH.OUTPUT/INPUT
from the tophandler right (WP 0171 00).
LEFT
0.00mV
0mA
sideshift solenoid. Check
RIGHT
0.00mV
0mA
resistance of the solenoid
between both pins and between
each pin and ground (WP 0048
00-26). Resistance of the
solenoid should be 18 to 26
Ohms.
3. Disconnect connector X189 Replace shorted/grounded X189
from tophandler junction box to solenoids wiring harness (WP
and disconnect solenoid 6021. 0221 00).
Check for short to ground at
loose part of X189 at pin D
(wire 189D) (WP 0048 00-26).
4. Disconnect
ECU
(791) a. Repair or replace shorted
wires or connectors (WP 0113
connector 2. Inspect ECU and
00).
connector pins for damage.
Check wire A189D (pin 11) for b. Replace ECU (791) (WP 0077
00).
short to ground (WP 0048 00-
26).
NOTE
Multiple error codes associated with a common connec-
tor on ECU (791) may be the result of a short to ground
in the harness for the common solenoid voltage. (See
0045 00-5
