TM 10-3930-675-24-2
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INTRODUCTION - CONTINUED
0050 00
NOTES - CONTINUED
11.
Autolube System (USMC Only).
a.
Check the function by entering the diagnostic menu; choose the Diag. Extra Function menu and advance to screen
10 of 13. Press "+" on the keyboard to activate the power for the autolube system. Remove the plug on the autol-
ube pump. Under the plug, two red lights should be on. Press the white button to start the pump. Ensure that the
paddle in the clear bowl rotates and the small piston pump on the main distribution valve is pumping.
b.
Inspect the supply lines at: the boom and boom support pivot pins, each end of the boom support folding cylinders,
front and rear upper and lower steering knuckle pins, each end of the rear axle pivot pin under the machine, and at
each end of the front and rear steering cylinders. Repair any line that is damaged as necessary.
END OF WORK PACKAGE
0050 00-23/(0050 00-24 Blank)