TM 10-3930-675-24-2
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0051 00
Table 1. Preventive Maintenance Checks and Services
(PMCS) for the RT 240 RTCH - Continued.
Item To
Item
Man-
Check/
Equipment Not Ready/
No.
Interval
Hours
Service
Procedure
Available If:
18
Semi-
Brake and
annual
Steering
Accumu-
lators
19
Semi-
Parking
Perform parking brake checks (WP
annual
Brakes
20
Semi-
Gear Motors
annual
(1,000
Hours)
Engine Bell
Remove drain plug from bell housing
21
Semi-
Housing
and check for signs of oil or water. If
annual
water is noted, investigate source and
(1,000
correct. If oil is noted, notify Sustain-
Hours)
ment Maintenance.
22
Semi-
Bogie Wheel
Exercise bogie wheel assembly (TM
annual
Assembly
10-3960-675-10). Inspect and clean as
required.
Place cab and boom in transport mode
23
Semi-
Cab Tracks
(TM 10-3930-675-10) and check for
annual
and Locking
free movement of cab rollers in tracks.
Bars
Clean and inspect for damage. Replace
24
Semi-
Cab Drain
Inspect two drain valves under cab.
annual
Valves
Press valve with two fingers to drain
water.
Inspect mounting studs and locknuts
25
Semi-
Front and
for looseness and damage.
annual
Rear
Shafts
26
Semi-
Cab Air
annual
Filters
27
Semi-
Cab Air
annual
Conditioner
behind cab. With engine and air condi-
tioner running, inspect sight gage on
top of receiver-drier for bubbles. If
bubbles are present, notify Direct Sup-
port Maintenance to charge air condi-
tioning system.
28
Biennial
Hydraulic
System Oil
0051 00-4