TM 10-3930-675-24-2
OIL SAMPLING VALVES AND HOSES REPLACEMENT - CONTINUED
0055 00
HYDRAULIC SYSTEM OIL SAMPLING VALVE HOSE REMOVAL
NOTE
Tag and trace routing of oil sampling valve hose prior to disconnecting.
1.
Move cab to transport position (TM 10-3930-675-10).
2.
Remove tiedown straps and clamps as necessary. Discard tiedown straps.
3.
Disconnect hose from oil sampling valve fitting and hydraulic control valve fitting. Remove hose.
4.
Remove hydraulic control valve fitting.
INNER SURFACE
HYDRAULIC SYSTEM
OF RIGHT FRAME
OIL SAMPLING VALVE HOSE
FORWARD
MAIN CONTROL VALVE
HYDRAULIC SYSTEM OIL SAMPLING VALVE HOSE INSTALLATION
1.
Install hydraulic control valve fitting.
2.
Connect hose to hydraulic control valve fitting and route to oil sampling valve.
3.
Connect hose to oil sampling valve fitting and secure hose with new tiedown straps and clamps as necessary.
4.
Start engine (TM 10-3930-675-10) and check hose for oil leaks.
5.
Return cab to operation position (TM 10-3930-675-10).
6.
Install engine cover (WP 0148 00).
END OF WORK PACKAGE
0055 00-5/(0055 00-6 Blank)
