TM 10-3930-675-24-2
FUEL SOLENOID SHUTOFF VALVE REPLACEMENT - CONTINUED
0056 00
INSTALLATION
NOTE
Assemble components of new fuel shutoff valve in the following order.
Ensure coil is a single-terminal coil.
1.
Place spacer (6) with O-ring groove, coil side up, on clean surface and install new O-ring seal (7).
2.
Install actuator disc (8) with cup side toward coil (12).
3.
Install valve disc (9) with raised area up.
4.
Install spring washer (10) with cup side toward coil (12).
5.
Install fuel shield (11) and coil (12).
6.
Hold assembly together and install with new O-ring seal (7) on fuel pump (5).
6
5
7
7
8
9
10
11
12
7.
Secure coil (12) and fuel shutoff valve (4) to fuel pump (5) with four screws (1). Tighten screws to 30 lb-in. (3.4 Nm).
8.
Connect wire lead (2) to fuel shutoff valve (4) with nut (3). Tighten nut to 25 lb-in. (2.8 Nm).
2
1
7
3
6
5
1
4
9.
Start engine, run, and check for leaks (TM 10-3930-675-10).
10.
END OF WORK PACKAGE
0056 00-2