TM 10-3930-675-24-2
WATER PUMP REPLACEMENT - CONTINUED
0068 00
REMOVAL - CONTINUED
1.
Remove water pump pulley retaining screw (1).
NOTE
Ensure puller mounting screws are threaded all the way through puller before applying pressure to puller screw.
2.
Use mechanical puller (2) to remove water pump pulley (3).
2
3
1
NOTE
Dust seal is removed as seal carrier is removed, or use a heel bar or similar tool to pry dust seal away
from seal case, then remove by hand.
3.
Remove dust seal (4). Discard dust seal.
4.
Remove five screws (8), clamping ring (7), oil seal (6), and gasket (5). Discard oil seal and gasket.
5
4
6
8
7
8
0068 00-2
