TM 10-3930-675-24-2
ALTERNATOR DRIVE BELT MAINTENANCE - CONTINUED
0071 00
INSTALLATION
CAUTION
Do not roll drive belt over pulley or pry on drive belt with tools. Rolling or prying on belt can cause
damage and shorten life of belt.
NOTE
Ensure sufficient slack adjustment has been allowed to install drive belt.
1.
Install drive belt (4).
2.
Position alternator (7) to remove slack in drive belt (4) and tighten adjusting link retaining screw (3) to hold alternator in
place.
Turn adjusting screw (1) clockwise to increase belt tension and tighten jamnut (2) (refer to Adjustment).
3.
4.
Tighten retaining screw (3) to 60 lb-ft (81 Nm).
5.
Tighten alternator mounting screw (5) and locknut (6) to 35 lb-ft (47 Nm).
3
2
1
4
5
7
6
0071 00-2
