TM 10-3930-675-24-2
STARTER REPLACEMENT - CONTINUED
0072 00
REMOVAL - CONTINUED
3.
Remove three screws (11), starter (7), and gasket (9) from engine (10). Discard gasket.
9
7
10
11
INSTALLATION
NOTE
Ensure all old gasket material has been removed from mating surfaces.
1.
Install new gasket (9) and starter (7) on engine (10) with three screws (11). Tighten screws to 140 lb-ft (190 Nm).
NOTE
Perform step 2 at rear of starter.
2.
Install terminals of cables (8) to starter (7) with washer (6) and nut (5).
NOTE
Perform step 3 at rear of starter solenoid.
3.
Install terminals of cables (3) on solenoid (4) with washer (2) and nut (1).
4.
Connect battery cables (WP 0110 00).
5.
Install new tiedown straps.
6.
Perform operational check of engine (TM 10-3930-675-10).
7.
Install engine cover (WP 0148 00).
END OF WORK PACKAGE
0072 00-3/(0072 00-4 Blank)
