TM 10-3930-675-24-2
TOPHANDLER PROXIMITY SWITCH JUNCTION BOXES REPLACEMENT - CONTINUED
0078 00
REMOVAL - CONTINUED
NOTE
Perform steps 3 and 4 in five places.
3.
Loosen cable nut (14) and slide cable nut and grommet (13) back on cable (12).
NOTE
Tag wires for installation.
4.
Using a jeweler's screwdriver, disconnect wires (8) from terminal blocks (7) and pull cables (12) with wires from junc-
tion box (3).
5.
Remove two screws (5), terminal block holder (6), and terminal blocks (7) from junction box (3).
NOTE
Perform step 6 in five places.
6.
Remove plastic nut (11) and fitting (10) from bottom of junction box (3).
7.
Remove four screws (9) and junction box (3) from tophandler.
3
7
7
8
6
9
5
10
11
12
13
14
0078 00-2
