TM 10-3930-675-24-2
BACKUP LIGHT AND WORK LIGHT MAINTENANCE - CONTINUED
0085 00
BULB REPLACEMENT - CONTINUED
2.
Disconnect connector (5) of bulb (6) from connector of wiring harness (4).
3.
Release wire clip (7) at rear of reflector insert (2) and remove bulb (6).
6
4
5
2
7
4.
Place new bulb (6) into rear of reflector insert (2) and fasten wire clip (7).
5.
Connect connector (5) of bulb (6) to connector of wiring harness (4).
6.
Position reflector insert (2) on rubber ring (1) on light housing (3) and push into place.
1
2
434-40179
3
0085 00-2
