TM 10-3930-675-24-2
BACKUP LIGHT AND WORK LIGHT MAINTENANCE - CONTINUED
0085 00
LIGHT REMOVAL
NOTE
Electrical connectors of light may be repaired in accordance with WP 0113 00.
Remove bulb (6) (refer to Bulb Replacement).
1.
2.
Remove nut (10), lockwasher (11), and light assembly (9) from bracket (8).
3.
Remove wire of wiring harness (4) with connector (5) from rear of light assembly (9).
9
4
5
8
10,11
LIGHT INSTALLATION
1.
Route connector (5) and wire of wiring harness (4) through rear of light assembly (9).
2.
Install light assembly (9) on bracket (8) with lockwasher (11) and nut (10).
Install bulb (6) (refer to Bulb Replacement).
3.
END OF WORK PACKAGE
0085 00-3/(0085 00-4 Blank)