TM 10-3930-675-24-2
BOOM ANGLE SENSOR REPLACEMENT - CONTINUED
0099 00
REMOVAL - CONTINUED
13
12
17
16
14
15
INSTALLATION
1.
Position boom angle sensor (4) with cable (14) on vehicle.
2.
Using a jeweler's screwdriver, connect three wires of cable (14) to terminal blocks (13) of junction box (12).
3.
Install bushing (17), grommet (16), and cable nut (15) on junction box (12).
4.
Install cover (10) on junction box (12) and tighten four screws (11).
0099 00-3
