TM 10-3930-675-24-2
BOOM ANGLE SENSOR REPLACEMENT - CONTINUED
0099 00
INSTALLATION - CONTINUED
NOTE
Position angle sensor wire and nut between six and nine o'clock position.
5.
Install boom angle sensor (4) on bracket (3) with three washers (7) and screws (6).
6.
Install lever (8) on boom angle sensor (4) and tighten setscrew (5).
7.
Position boom angle sensor (4) assembly on bolt (9) and boom and install two washers (2) and screws (1). Tighten
screws.
8.
Install new tiedown straps.
1,2
3
4
5
6,7
8
9
9.
Perform boom and tophandler calibration (WP 0259 00).
END OF WORK PACKAGE
0099 00-4
