TM 10-3930-675-24-2
SLAVE STARTING RECEPTACLE REPLACEMENT - CONTINUED
0112 00
RIGHT SLAVE STARTING RECEPTACLE INSTALLATION - CONTINUED
4.
Install cap (1) on slave starting receptacle (2).
3,4,5
6
1,2
5.
Connect battery cables (WP 0110 00).
LEFT SLAVE STARTING RECEPTACLE REMOVAL
1.
Remove two screws (19), lockwashers (20), and cables (21) from rear of slave starting receptacle (13). Discard lock-
washers.
2.
Remove cap (14) from slave starting receptacle (13).
3.
Remove four locknuts (15), eight washers (16), four screws (17), slave starting receptacle (13), and cord of cap (14)
from mounting plate (18). Discard locknuts.
14
13
21
15,16,17
19,20
21
18
0112 00-3
