TM 10-3930-675-24-2
MASTER BATTERY SWITCH REPLACEMENT - CONTINUED
0111 00
REMOVAL - CONTINUED
NOTE
Tag cables prior to disconnection to ensure proper connection on installation. Also note switch termi-
nal to which cables are connected.
3.
Pull back two rubber boots (11) and remove two nuts (9), washers (10), and four cables (8) from terminals of master bat-
tery switch (1).
8
1
11
9,10
INSTALLATION
1.
Install four cables (8), two washers (10), and nuts (9) on terminals of master battery switch (1). Install two rubber boots
(11).
2.
Position master battery switch (1) with shaft through opening in mounting plate (4). Install two screws (7), washers (6),
and new locknuts (5).
3.
Install boot (2) and handle (3) on shaft of master battery switch (1).
Connect battery cables (WP 0110 00).
4.
5.
Close battery compartment door (TM 10-3930-675-10).
END OF WORK PACKAGE
0111 00-3/(0111 00-4 Blank)
