TM 10-3930-675-24-2
BATTERY CABLES REPLACEMENT - CONTINUED
0110 00
REMOVAL - CONTINUED
5,6
4
1
4
5.
Remove locknut (5) and washer (6) and disconnect four NEGATIVE cables (4) from side of battery compartment (1).
6.
At ends of two battery cables (10), raise plastic cap (7) and loosen nut (8) and screw (9) on battery cable clamp.
7.
Remove two battery cables (10) from four batteries (15).
8.
At end of two POSITIVE battery cables (11), raise plastic cap (12) and loosen nut (13) and screw (14) on battery cable
clamp.
9.
Disconnect POSITIVE battery cables (11) from two of four batteries (15).
10.
Disconnect POSITIVE battery cables (11) from master battery switch (WP 0111 00) and remove.
8,9
10
7
11
19
12
13,14
18
15
16,17
10
0110 00-3
