TM 10-3930-675-24-2
PARKING BRAKE PADS MAINTENANCE - CONTINUED
0122 00
REMOVAL
NOTE
A strap wrench may be required to remove cover.
1.
Remove cover (6) from pressure ring (4). Remove and discard O-ring (8) only if damaged.
2.
Loosen jamnut (5) and remove adjusting screw (7) and jamnut from piston (9).
3.
Retract adjustment cylinder (2) into piston (9) by prying between adjustment cylinder and one brake pad (10).
NOTE
Only one of two bolts needs to be removed in order to remove brake pads.
4.
Remove cotter pin (13) from one of two castle nuts (14). Discard cotter pin.
5.
Remove castle nut (14) and bolt (12) from parking brake housing (3) and parking brake bracket (1).
NOTE
One brake pad is held in place by a magnet.
6.
Remove two brake pads (10) from parking brake housing (3) and parking brake rotor (11).
1
3
2
14
13
12
4
5
6
7
8
9
10
10
11
0122 00-2
