TM 10-3930-675-24-2
PARKING BRAKE CONTROL VALVE REPLACEMENT - CONTINUED
0124 00
INSTALLATION
NOTE
Refer to General Maintenance Instructions (WP 0284 00) for complete instructions on connecting
hydraulic hoses and applying proper torque.
1.
If removed, install control valve bracket (1) on cab with two new locknuts (10).
2.
Install control valve (4) on control valve bracket (1) with two screws (7), washers (6), and new locknuts (5).
3.
Install switch (11) on control valve (4).
4.
Connect two connectors (12) of wiring harness to switch (11).
5.
Install three fittings (8) on control valve (4).
6.
Connect three hydraulic hoses (9) to fittings (8).
7.
Check level of oil in hydraulic reservoir and add oil as needed (WP 0050 00).
8.
Start engine (TM 10-3930-675-10) and check for leaks.
9.
Install cover (3) on control valve bracket (1) with four screws (2).
1
2
3
2
NOTE
Replace hydraulic reservoir return filters after 100 hours of operation (WP 0185 00).
END OF WORK PACKAGE
0124 00-3/(0124 00-4 Blank)