TM 10-3930-675-24-2
PARKING BRAKE SYSTEM HYDRAULIC HOSES AND FITTINGS REPLACEMENT - CONTINUED
0125 00
REMOVAL
1.
Using illustration (refer to foldout, FO-1) as a guide, remove damaged hose(s) or fitting(s). Cap or plug openings.
NOTE
Note position of tiedown straps and clamps to aid in installation.
2.
Remove tiedown strap(s) and clamp(s) (if applicable). Discard tiedown strap(s).
3.
Discard O-ring(s) removed.
INSTALLATION
NOTE
Refer to General Maintenance Instructions (WP 0284 00) for complete instructions on connecting
hydraulic hoses and applying proper torque.
1.
Lubricate and install new O-ring(s).
2.
Remove caps/plugs and install and tighten hose(s) or fitting(s).
3.
Install clamp(s) and new tiedown strap(s) (if applicable) in same position as noted during removal.
4.
5.
Start engine (TM 10-3930-675-10) and check for leaks.
NOTE
Replace hydraulic reservoir return filters after 100 hours of operation (WP 0185 00).
END OF WORK PACKAGE
0125 00-2