TM 10-3930-675-24-2
BRAKE COOLING FILTER AND FILTER HEAD REPLACEMENT
THIS WORK PACKAGE COVERS
Brake Cooling Filter: Removal, Installation
Brake Cooling Filter Head: Removal, Installation
INITIAL SETUP
Maintenance Level
Materials/Parts - Continued
Tag, Marker (Item 38, WP 0290 00)
Organizational
Filter, Brake Cooling (P/N 920130.0100) (2)
Tools and Special Tools
References
Tool Kit, General Mechanic's (Item 128, WP 0289
TM 10-3930-675-10
Wrench, Strap, Oil Filter (Item 138, WP 0289 00)
Materials/Parts
Oil, Lubricating, OE/HDO 10 (Item 26, WP 0290
Equipment Condition
Wheels chocked
Rag, Wiping (Item 30, WP 0290 00)
Brake hydraulic system pressure relieved (WP 0164
Sealant, Pipe (Item 33, WP 0290 00)
WARNING
DO NOT disconnect or remove any hydraulic system line or fitting unless hydraulic system pres-
sure has been relieved. Tighten all connections before applying pressure. Escaping hydraulic fluid
under pressure can penetrate the skin, causing serious injury.
Search for leaks with a piece of cardboard. Protect hands and body from high-pressure fluids. If
an accident occurs, see a doctor immediately. Any fluid injected into the skin must be surgically
removed within a few hours or gangrene may result.
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before disconnecting
any hydraulic lines. Failure to do so could result in injury.
Hydraulic fluid is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
CAUTION
Wipe filter and surrounding area clean prior to removal. After filter removal, immediately install
replacement filter or cover area with a clean rag. Contaminated hydraulic system could cause equip-
ment failure.
