TM 10-3930-675-24-2
DOLLY WHEEL MAINTENANCE - CONTINUED
0130 00
CLEANING AND INSPECTION
1.
Clean tire, wheel, axle shaft, bracket, and two mounting pins (10) with detergent and water. Dry with clean rags.
2.
Inspect components for excessive corrosion and damage. Replace defective components.
3.
For tire maintenance, refer to TM 9-2610-200-14.
ASSEMBLY
1.
Install grease fitting (9) in hub of wheel (6).
2.
Apply a thin coat of grease to two new O-rings (7) and position one O-ring on each side of hub of wheel (6).
3.
Apply a thin coat of grease to bearing surface of axle shaft (5) and install axle shaft through bracket (8) and wheel (6).
Rotate axle shaft, as necessary, until fully seated.
4.
Install retainer (4) on each end of axle shaft (5) with two screws (3), washers (2), and nuts (1).
5.
Position each of two O-rings (7) against surface of bracket (8).
10
8
6
4
5
1,2,3
9
7
6.
7.
Return dolly wheel to battery and dolly wheels storage compartment (TM 10-3930-675-10).
END OF WORK PACKAGE
0130 00-2