TM 10-3930-675-24-2
CAB TRANSPORT LIFT MAINTENANCE - CONTINUED
0138 00
CAB TRANSPORT LIFT REMOVAL - CONTINUED
5.
Remove four locknuts (47), screws (48), eight washers (49), two shims (50), and rails (51) from cab transport lift (44).
Discard locknuts.
50
44
47,48,49
51
CAB TRANSPORT LIFT INSTALLATION
1.
Install two shims (50) and rails (51) on cab transport lift (44) with eight washers (49), four screws (48), and new lock-
nuts (47).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance
during procedure. Ensure that any lifting device used is in good condition and of suitable load
capacity. Keep clear of heavy parts supported only by lifting device. Failure to follow this warning
may result in death or injury to personnel.
Lifting device must have a 2,000-lb (908-kg) capacity to lift cab transport lift. Failure to follow
this warning may result in death or injury to personnel.
0138 00-14
