TM 10-3930-675-24-2
CAB DOOR WEATHERSEAL REPLACEMENT - CONTINUED
0153 00
INSTALLATION
1.
At cab floor, mark center of cab door opening.
2.
Start new weatherseal (12) at mark and install weatherseal on cab door opening. Press weatherseal firmly into place.
3.
Cut weatherseal (12) to a length that allows ends of weatherseal to come together.
4.
Apply sealing compound to ends of weatherseal (12) and press ends together. Allow sealing compound to set.
5.
Install plate (14) on cab floor with three screws (13).
6.
Install door holder (8) on cab door (6) with screw (9), two washers (10), and new locknut (11).
7.
From inside cab (2), with cab door (6) closed, install yoke (3) on cab door with two washers (5) and screws (4).
8.
Connect yoke (3) to cylinder (1) and install nut (7).
3
4,5
2
1
6
7
END OF WORK PACKAGE
0153 00-3/(0153 00-4 Blank)
