TM 10-3930-675-24-2
BATTERY AND DOLLY WHEELS STORAGE COMPARTMENT REPLACEMENT - CONTINUED
0155 00
REMOVAL
1.
Remove six locknuts (1), screws (2), twelve washers (3), and footstep (4) from top of storage compartment (5). Discard
locknuts.
2.
Disconnect cables from NATO slave receptacle and master battery switch (WP 0111 00 and WP 0112 00).
3.
Remove cables from storage compartment (5) by pulling them out into engine compartment.
4.
Position forklift truck against side of vehicle with forklift tines supporting weight of storage compartment (5).
5.
Remove five locknuts, ten washers, and five bolts securing storage compartment (5) to side of frame (6). Discard lock-
nuts.
6.
Remove six locknuts (7), twelve washers (8), and six bolts (9) securing top of storage compartment (5) to top of frame
(6). Discard locknuts.
7.
Remove storage compartment (5) from vehicle frame (6).
5
6
4
7,8,9
1,2,3
5
INSTALLATION
1.
Use forklift truck to position storage compartment (5) against vehicle frame (6).
2.
Install five bolts, ten washers, and five new locknuts securing storage compartment (5) to side of frame (6).
3.
Install six bolts (9), twelve washers (8), and six new locknuts (7) securing top of storage compartment (5) to top of
frame (6). Remove forklift truck.
4.
Feed cables for NATO slave receptacle and master battery switch into storage compartment (5) through opening in back
of compartment.
5.
Connect cables to NATO slave receptacle and to master battery switch (WP 0111 00 and WP 0112 00).
6.
Install footstep (4) to top of storage compartment (5) with twelve washers (3), six screws (2), and new locknuts (1).
0155 00-2
