TM 10-3930-675-24-2
AUXILIARY HYDRAULIC PUMP REPLACEMENT - CONTINUED
0165 00
REMOVAL - CONTINUED
NOTE
Perform step 12 to remove fittings from pump, if a new pump is being installed.
12.
Remove straight connector (10) and elbow (11) from pump (8).
INSTALLATION
NOTE
hydraulic hoses and applying proper torque.
Perform step 1 to install fittings removed from old pump, if a new pump is being installed.
1.
Install elbow (11) and straight connector (10) on pump (8).
2.
Position two spacers (29) and pump (8) on mounting bracket (26).
3.
Loosely install two washers (28) and bolts (27).
4.
Secure clamp (25) around pump (8) with two allen screws (24). Fully tighten two bolts (27).
8
24
25
29
26
27,28
5.
Connect power cable (23) to solenoid (15) with lockwasher (22) and nut (21).
6.
Connect two connectors (16) to solenoid (15).
7.
Connect strap (17) and gray wire (20) with lockwasher (19) and nut (18).
0165 00-4
