TM 10-3930-675-24-2
TOPHANDLER HYDRAULIC SLEWING MOTORS REPLACEMENT - CONTINUED
0166 00
REMOVAL
1.
Remove ten screws (3) and one of four protection covers (2) from turning plate (1).
1
2
3
NOTE
To remove slewing motor with hydraulic manifold, perform steps 2 and 3.
To remove slewing motor without hydraulic manifold, proceed to step 4.
2.
Remove four socket head screws (4) securing hydraulic manifold (5) with hoses to slewing motor (6).
3.
Remove hydraulic manifold (5) with hoses attached from slewing motor (6). Discard O-rings.
5
4
6
4
0166 00-2
