TM 10-3930-675-24-2
BOOM HYDRAULIC SYSTEM HOSES AND FITTINGS REPLACEMENT - CONTINUED
0182 00
REMOVAL
1.
Using applicable boom hydraulic subsystem illustration (refer to foldouts, FO-11 thru FO-14 at the end of this manual)
as a guide, remove damaged hose(s) or fitting(s). Cap or plug openings.
NOTE
Note position of tiedown straps and clamps to aid in installation.
2.
Remove tiedown strap(s) and clamp(s) (if applicable). Discard tiedown straps.
3.
Remove and discard O-ring(s).
INSTALLATION
NOTE
hydraulic hoses and applying proper torque.
1.
Lubricate and install new O-ring(s).
2.
Remove caps/plugs and install and tighten hose(s) or fitting(s).
3.
Install clamp(s) and new tiedown strap(s) (if applicable) in same position as noted during removal.
4.
Check oil level in hydraulic reservoir (WP 0050 00).
5.
Start engine (TM 10-3930-675-10) and check for leaks.
NOTE
Replace hydraulic reservoir return filters after 100 hours of operation (WP 0185 00).
END OF WORK PACKAGE
0182 00-2
