TM 10-3930-675-24-2
AIR CONDITIONING COMPRESSOR DRIVE BELTS REPLACEMENT - CONTINUED
0195 00
INSTALLATION
NOTE
If drive belts are worn, cracked, frayed, or dry rotted, belts must be replaced.
1.
Install drive belts (10) around accessory drive pulley (9) and A/C compressor pulley (6).
2.
Tighten belt tension adjusting rod (8) until drive belts (10) can be depressed no more than -in. (12.7 mm) at center of
belts.
3.
Tighten two adjusting jamnuts (7) on belt tension adjusting rod (8).
4.
Tighten screw (2), washer (4), and nut (3) securing A/C compressor (5) to mounting bracket (1).
5.
Recheck tension of drive belts (10) to ensure not more than -in. (12.7 mm) depression at center of belts.
1
2,3,4
5
6
10
7
9
8
7
6.
Turn master battery switch to ON position.
7.
Operate engine (TM 10-3930-675-10) for ten minutes. Shut down, recheck, and adjust tension as needed.
8.
Install engine cover (WP 0148 00).
END OF WORK PACKAGE
0195 00-2
