TM 10-3930-675-24-2
OIL FILTER HEAD AND OIL COOLER MAINTENANCE - CONTINUED
0209 00
REMOVAL - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Failure to follow this warning may result in injury to personnel.
NOTE
When removing oil filter head and oil cooler as a unit, ensure oil cooler thermostat housing flange, O-
ring adapters, and thermostat housing flange O-rings are removed with oil cooler.
3.
Remove six screws (10) and washers (11) securing oil filter head (3) to engine and, with assistance, remove oil cooler
(7) and oil filter head as a unit from engine. Discard oil filter head gasket (9) and two oil cooler thermostat housing
flange O-rings (8).
7
8
10,11
9
10,11
3
0209 00-3