TM 10-3930-675-24-2
TRANSMISSION CALIBRATION - CONTINUED
0225 00
CALIBRATION - CONTINUED
2.
Transmission Calibration, ECM to Clutch Modulation Cycles.
a.
To initiate calibration process, press "Enter".
b.
When calibration process is completed without error, ECS display will show an AEB MAIN CODE of no. 7 (refer
to Table 1). Calibration data will be saved within transmission ECM when ignition is turned off.
c.
When an error is identified during calibration process, AEB MAIN CODE will show a range of error codes of 0
thru 14 identifying the transmission component under calibration and an AEB SUB CODE range of error codes of
1 thru 8 (refer to Main Codes and Sub Codes in Table 1 and Table 2).
CALIBR GEAR BOX
1 (2)
AEB CYCLE NR
0
AEB MAIN CODE
0
AEB SUB CODE
0
d.
When calibration process is completed without error, press "Enter" to return to main menu. ECS display screen
should resemble window shown below:
CALIBR GEAR BOX
2 (2)
CALIBRATION OF
GEAR BOX DONE
ENTER
0225 00-2