TM 10-3930-675-24-2
TRANSMISSION CALIBRATION - CONTINUED
0225 00
CALIBRATION - CONTINUED
Table 2. Sub Code Identification.
SUB
CODE
COMPONENT BEING CALIBRATED
1
Stop and restart truck if fault code is "0". Repeat calibration procedure. If failure
continues, transmission maintenance may be required.
2
Stop and restart truck. Ensure transmission shift control lever is in Neutral (N) position.
Repeat calibration procedure.
3
Stop and restart truck. Ensure parking brake is applied. Repeat calibration procedure.
4
Stop and restart truck. Test parking brake operation. If parking brake operates properly,
repeat calibration procedure. If parking brake is not operating properly, service parking
brake. Repeat calibration procedure.
5
Stop and restart truck. Allow transmission to warm to operating temperature. Repeat
calibration procedure.
6
Allow transmission oil to cool by idling engine but not operating transmission. When oil
temperature has cooled, transmission ECM will resume calibration program.
7
Increase engine RPM. Transmission ECM will resume calibration program when RPM
are within a specified range.
8
Decrease engine RPM. Transmission ECM will resume calibration program when RPM
are within a specified range.
END OF WORK PACKAGE
0225 00-4
