TM 10-3930-675-24-2
TOPHANDLER AND STEERING HYDRAULIC PUMP ASSEMBLY REPLACEMENT - CONTINUED
0242 00
INSTALLATION - CONTINUED
25.
Check oil level in hydraulic reservoir (WP 0050 00).
CAUTION
Failure to prime pump assembly may damage pump.
26.
Trace and locate return hoses for pump assembly at top of hydraulic reservoir. Disconnect return hoses and fill hoses
with hydraulic fluid. Reconnect hoses.
27.
Start engine (TM 10-3930-675-10), operate tophandler and steering systems, and check for leaks.
28.
Recheck oil level in hydraulic reservoir (WP 0050 00).
29.
If a new tophandler and steering pump assembly was installed, adjust each pump (WP 0243 00).
30.
Install nylon straps and new tiedown straps as necessary to support hydraulic hoses.
31.
Install transmission access covers (WP 0142 00).
32.
Return cab to operational position (TM 10-3930-675-10).
NOTE
Replace hydraulic reservoir return filters after 100 hours of operation (WP 0185 00).
END OF WORK PACKAGE
0242 00-15/(0242 00-16 Blank)
