TM 10-3930-675-24-2
TOPHANDLER AND STEERING HYDRAULIC PUMP ASSEMBLY REPLACEMENT - CONTINUED
0242 00
INSTALLATION - CONTINUED
8.
Install fittings (22 and 25) on pump (4).
4
25
22
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting device. Failure to follow this warning may result in
injury to personnel.
9.
Apply sealant to mounting surface of pump (4).
10.
With assistance and using a nylon sling, position pump (4) at transmission (45) and install four screws (46).
0242 00-10
