TM 5-3810-306-34
TABLE 3-1. DIRECT AND GENERAL SUPPORT TROUBLESHOOTING (CONTD)
Malfunction
Test or Inspection
Corrective Action
38. OUTRIGGER CONTROL VALVE SOLENOID FAILURE
Step 1.
No current.
a. Check power source of at least 85% of coil rating.
If OK, do Step 2.
Step 2.
Damaged solenoid assembly.
a. Check solenoid for obvious damage. If OK, do Step 3.
Step 3.
Short in solenoid.
a. Check solenoid.
b. Replace coil. (Refer to page 13-72.)
3-29
