TM 5-3810-306-34
c.
Remove air cylinder (4).
b. Remove linkage bars (20) and (21) from
mounting plate (7) linkage bars.
NOTE
ASSEMBLY:
Count number of turns when
removing clevis rod ends (18) from
1. INSTALL LINKAGE BARS (20) AND (21).
sir cylinders (4) for reassembly.
a. Position linkage bars (21) in mounting plate (7)
d. If necessary remove tee fittings (16), elbows
linkage bars, and linkage bars (20) on linkage
(17), clevis rod ends (18) and nuts (19) from air
bars (21).
cylinders (4).
b. Secure linkage bars (20) and (21) with clevis
3. REMOVE LINKAGE BARS (20) AND (21).
pins (23) and new cotter pins (22).
a. Remove cotter pins (22) and clevis pins (23).
2. INSTALL AIR CYLINDERS (4).
Discard cotter pins (22).
a. If removed, install nuts (19), clevis rod ends (18)
(same number of turns noted on disassembly),
elbows (17) and tee fittings (16).
7-59
