TM 5-3810-306-34
c. Install washers and nuts and tighten snug,
8. TORQUE TURNTABLE BOLTS, EXPLAINED
but do not torque.
UNDER
TURNTABLE
BEARING
INSTALLATION. (REFER TO PAGE 15144.)
d. Disconnect the material handling sling falls
and remove.
9. REEVE CABLE THROUGH PULLEYS. (REFER
TO TM 5-3810-306-20.)
7. INSTALL REMAINING
BOLTS,
WASHERS,
AND NUTS.
10. INSTALL HOOK BLOCK ASSEMBLY. (REFER
TO TM 5-3810-306-20.)
a. Alternately swing left and right and install
all remaining bearing bolts, washers, and
11. INSTALL OVERHAUL BALL. (REFER TO TM 5-
nuts.
3810-306-20.)
END OF TASK
15-94
