TM 55-8145-201-14
1-10. LOCATION AND DESCRIPTION OF MAJOR COMPONENTS.
a.
Corner Fittings (1). Four upper corner fittings provide hoist points during lifting operations. Spacer blocks
placed in the two front or rear corner fittings position and align container during tandem transport. Four lower
corner fittings mate with coupling hardware on transport vehicle. Corner fittings also allow stacking of
refrigerated containers during shipment and storage.
b.
Ladder (10). Permits personnel to access equipment and roof of container. Lower section of ladder folds
down during use and up for storage.
c.
Refrigeration Unit (2). Cools container interior. Refer to TM 9-4110-252-14 fr additional information on the
refrigeration unit.
d.
Generator Set (3). Provides electrical power to operate refrigeration unit and container interior light. Refer
to TM 5-6115-585-12/34 for additional information on the generator set.
NOTE
Spacer block is not supplied with the refrigerated container.
e.
Spacer Block (9). Positions and provides clearance between containers during tandem transport. One
spacer block is supplied with each container.
f.
Spacer Block Bracket (8). Stores spacer block when not in use.
g.
Fuel Tank (7). Stores and supplies fuel to the generator set.
h.
Temperature Recorder (5). Spring operated mechanical plotter records container interior temperature.
i.
Manual Holder (4). Provides waterproof storage for technical manual, temperature recorder paper charts and
related documentation.
j.
Power Cable (6). Five-foot long cable connects 10Kw generator set to refrigeration unit power cable.
1-4