TM 55-8145-201-14
Table 2-1. Operator Preventive Maintenance Checks and Services for Model SC-219.
NOTE
If the equipment must be kept in continuous operation, do only the procedures that can
be done without disturbing operation. Make complete checks and services when the
equipment is shut down.
Location
Item
Interval
Item to
Procedure
Not Fully Mission
No.
Check/Service
Capable If:
EXTERIOR
1
Before
Name Plates
Inspect for missing, damaged or
illegible name plates.
2
Before
Door Hardware
a. Inspect for bent or broken door
Any release handle broken
(Rear Doors)
release handles.
off or badly bent.
b. Inspect for broken or missing
handle locks.
c. Inspect for broken lock keepers.
Lock keeper broken.
d. Inspect for loose or missing
fasteners.
3
Before
Doors (Rear)
a. Inspect door exterior for obvious
Door panel split or badly
damage, cracks, splits, or
cracked.
delamination.
b. Inspect door hinges for cracks and
Door hinge cracked top to
missing fasteners.
bottom.
c. Inspect container frame around
Container frame cracked.
doors for cracks, splits, and broken
welds.
4
Before
Left Side Panel
a. Inspect for obvious damage,
Side panel split, cracked or
cracks, splits or delamination.
punctured through interior.
b. Check for loose or missing
fasteners.
c. Inspect container upper and lower
Container frame cracked.
side frame for cracks, splits, and
broken welds.
5
Before
Ladder
Inspect ladder for cracked welds and
bent frame.
2-9
