TM 55-8145-202-14
WARNING
To prevent injury to personnel and damage to equipment, make sure refrigeration unit is secured
to forklift tines. Refrigeration unit is top heavy. Weight of evaporator coil (inside container) may
cause unit to tip forward when removed. Make sure top of refrigeration unit is tied back and
bottom of unit is secured to forklift.
(7) Secure refrigeration unit (8) to fork lift tines (7).
(8) Remove sealant around refrigeration unit inside container.
(9) Remove four nuts (9), eight flat washers (10) and four cap screws (11).
(10) Carefully remove refrigeration unit (8) from container (12).
b.
Installation.
WARNING
To prevent injury to personnel and damage to equipment, make sure refrigeration unit is secured
to forklift tines. Refrigeration unit is top heavy. Weight of evaporator coil (inside container) may
cause unit to tip forward when removed. Make sure top of refrigeration unit is tied back and
bottom of unit is secured to forklift. Unit may fall off forklift if not properly secured.
(1) Using the forklift, carefully reset the refrigeration unit back in the container.
(2) Attach the refrigeration unit to the container using the four cap screws (11), flat washers (10, and the
four nuts (9).
(3) Clean the inside container of the refrigeration unit of any previously applied sealant. Apply fresh
sealant.
4-51
