TM 9-3990-260-14&P
2-10. INSTALLING/STOWING M3 CROP CENTER
AND
REAR BLOCKER ASSEMBLES (CONT).
d. Stowing the Rear Blocker Assemblies.
NOTE
The rear blockers are interchangeable.
The smooth side of the blocker must face away from the cargo deck in the stowed
position.
The hitch pin clip and lanyard must be positioned on the side of the blocker facing the
deck when in the stowed position.
The following procedures are applicable for either rear blocker.
(1) Disconnect two hitch pin clips (7) from their normal positions inserted through the hole in
the bottom of the blocker legs (10) and remove the rear blocker from its normal position.
2-16