TM 9-3990-260-14&P
ASSEMBLIES.
a.
Installing the Center Blocker Assembly.
NOTE
End structure assembly must be in the raised position to install the center blocker assembly.
(1) Disconnect two bolt snaps (1) from their positions clipped to the closest tiedown ring (2) and
remove the center blocker (3) from its stowed position.
(2) Insert the center blocker assembly legs (4) into the two circular holes located at the front
edge of the deck, on both sides of the end structure assembly (5).
(3) Secure the center blocker assembly (3) in the normal position by clipping each bolt snap (1)
to the spring snap lanyard (6) which is looped through a small hole in the front of the main
beam.
