TM 9-3990-260-14&P
UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT
MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
Section I. INTRODUCTION
F-1. SCOPE.
This RPSTL lists and authorizes the spares and repair parts; special tools; special test, measurement, and diagnostic
equipment (TMDE); and other special support equipment required for performance of Unit, Direct Support, and
General Support Maintenance of the Container Roll-In/Out Platform (CROP) M3 and M3A1. It authorizes the
requisitioning, issue, and disposition of spares, repair parts, and special tools as indicated by the Source, Mainte-
nance and Recoverability (SMR) codes.
F-2. GENERAL.
In addition to Section I, Introduction, this RPSTL is divided into the following sections:
a.
Section II, Repair Parts List. A list of spares and repair parts authorized by this RPSTL for use
in the performance of maintenance. The list also includes parts which must be removed for replacement of the
authorized parts. Parts lists are composed of functional groups in ascending alphanumeric sequence, with the parts
in each group listed in ascending figure and item number sequence. Bulk materials are listed by item name
sequence at the end of the section. Repair part kits are listed separately in their own functional group within Section
II. Repair parts for reparable special tools are also listed in this section. Figures 1 through 5 list the repair parts list
for Container Roll-In/Out Platform (CROP) M3. Figures 6 through 9 list the repair parts list for Container Roll-In/
Out Platform (CROP) M3Al.
b.
Section III, Special Tools List. Not Applicable. No special tools are required for
Container Roll-In/Out Platform (CROP) M3 and M3A1.
c.
Section IV; Cross-reference Indexes. A list, in National Item Identification Number (NIIN)
sequence, of all National stock numbered items appearing in the listing, followed by a list in alphanumeric
sequence of all part numbers appearing in the listings. National Stock Numbers (NSN) and part numbers are cross-
referenced to each illustration/figure and item number appearance. The figure and item number index lists figure
and item numbers in alphanumeric sequence and cross-references NSN, Commercial and Government Entity
(CAGE) Code (C), and part numbers.
F-3. EXPLANATION OF COLUMNS (SECTION II AND III).
a.
ITEM NO - Column (1). Indicates the number used to identify items called out in the illustration.
b.
SMR CODE -Column (2). The SMR code is a five-position code containing supply/requisition-
ing information, maintenance category authorization criteria, and disposition instruction, as shown in the following
breakout: