TM 10-3930-641-34-1
CYLINDER LINER REMOVAL/INSTALLATION (CONT)
(Sheet 6 of 7)
LOCATION/ITEM
ACTION
REMARKS
2.
Cylinder liner (projection)
f.
If liner projection height is not .005 +
height (cont)
.003 in. (0.13 + 0.08 mm), check the thickness
of the following parts:
Spacer plate (X): .338 + .001 in. (8.59 +
0.03 mm).
Spacer plate gasket (Y): .008 : .001 in.
(0.20 + 0.03 mm).
Cylinder liner flange (Z):.350 i .0008 in.
(8.89 0.020 mm).
NOTE
All surfaces must be clean and dry when the
spacer plate gasket is installed.
TA099088
Go on to Sheet 7
3-244