TM10-3930-641-34-2
FRONT DIFFERENTIAL AND BEVEL GEAR REMOVAL (CONT)
(Sheet 2 of 4)
LOCATION/ITEM
ACTION
REMARKS
1.
Drive axles
Remove.
See Drive Axles Removal/Installation, page 4-
250.
2.
Main drive shaft group
Remove.
See TM10-3930-641-20.
3.
Oil Drain from front axle housing.
4. Mast
WARNING
Keep all personnel except operator away from
vehicle when mast is used to lift front end.
a.
Lower until it rests on wood blocks placed
on ground.
b.
Continue lowering mast until vehicle
front wheels are about 9 in. (22.9 cm) off
ground.
c.
Put jack stands under vehicle.
d.
Place wood blocks under front tires.
WARNING I
Block both sides of rear tires to prevent
vehicle movement.
Go on to Sheet 3
4-243