SERVICE BRAKE CONTROL VALVE REPLACEMENT
THIS WORK PACKAGE COVERS
References - Continued
Tools and Special Tools
Tool Kit, General Mechanic's (Item 128, WP 0289
Oil, Lubricating, OE/HDO 10 (Item 26, WP 0290
Brake hydraulic system pressure relieved (WP 0164
Steering column base and brake pedal disconnected
Brake light switch and pressure sensors removed
DO NOT disconnect or remove any hydraulic system line or fitting unless hydraulic system pres-
sure has been relieved. Tighten all connections before applying pressure. Escaping hydraulic fluid
under pressure can penetrate the skin, causing serious injury.
Search for leaks with a piece of cardboard. Protect hands and body from high-pressure fluids. If
an accident occurs, see a doctor immediately. Any fluid injected into the skin must be surgically
removed within a few hours or gangrene may result.
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before disconnecting
any hydraulic lines. Failure to do so could result in injury.
Hydraulic fluid is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
Wipe area clean around all hydraulic connections prior to disconnecting. Cap or plug all openings
after disconnecting. Contamination of hydraulic system could result in equipment failure.
Tag all hydraulic lines.